ENGLISH
Pag. 41
2.5
Power supply connections
Figure 6) Main board power supply connection - box version
Figure 7) Main board power supply connection - RACK version
2.6
DIP switch setting for the RS485 loops, PC communication and
control panel language
The series of SD2 dip-switches (Figure 5) must be set for:
³
Communication (baud rate and protocol) for unit compatibility with various gas detec-
tor versions and IN / OUT modules.
³
Communication (baud rate) of the RS232 serial port for the communication with the
PC.
The SD3 dip switch series is for set the language text of the control panel display.
The dip switch state is acquired at the control panel switch ON.
+ +
- -
100-120 Vac
200-240 Vac
Earth
110
220
select the
input voltage
110/220V is selected by switch
Before power ON please check
Input voltage avoiding damage
Control panel main board
27.6 Vdc / 4A power supply
F2
F1
+ -
+
-
Control panel main board
RACK power supply
F2
F1
V+ (24Vdc)
+
-
GND
V+ (24Vdc)
V+ (24Vdc)
GND
+ -
Summary of Contents for MULTISCAN++/S1-32
Page 75: ......
