ENGLISH
Pag. 62
up/down arrow keys one may search in the Flt & fault event log
SETTINGS
Choosing the Settings LOG option enters the Settings events list. Using the up/down arrow
keys one may search in the Settings event log
FULL LOG
The FULL LOG option shows all the events, in chronological order, starting with the most
recent. Using the up/down arrow keys one may search in the event log
3.12
If a Printer is connected to the control panel and in the Set Printer Mode the On Request
parameter is selected (see next paragraph) by selecting PRINT and pressing ENT one starts
the printout of the system detector list with all the programming data (Zone, detector de-
scription, Alarm levels etc.).
ABORT PRINT
To stop and cancel the printout
SET PRINTER MODE
(Users level “M” and “E”)
This parameter is used to select the print mode.
ON REQUEST
In this case, the control panel only prints specific details (Event Log, detector list etc.) at the
user’s request, in the different menu. The printer can be connected and disconnected at any
time as required.
REAL TIME
This option switches the printer to on-line mode and requires that a printer be continuously
connected to the system. Events are printed as and when they occur.
If Real Time is enabled, the event log and other options will not be printed at the user’s re-
quest. The Real Time parameter must be disabled to permit all other print option to operate.
PLEASE NOTE
Summary of Contents for MULTISCAN++/S1-32
Page 75: ......
