Setting Up ReDS System
45
2
While holding the sensor vest back piece flat against the body with one hand, use your
other hand to attach the Left Fastening Flap.
Figure 31: Tightening the Left Fastening Flap
3
While holding the sensor vest back piece flat against the body with one hand, use your
other hand to tighten the Right Fastening Flap around the patient’s chest so that it fits
snugly, but is not uncomfortably tight. For patient comfort, make sure that the side flaps
(left and right flaps) are not pressed up too tightly into the armpit.
Figure 32: Tightening the Right Fastening Flap
4
Verify that the back center strip is still centered on the patient’s spinal column (as in step
6). If necessary, make minor adjustments to the side (right/left) straps.
Place one of your
hands on the back
piece.
Pull the Left Fastening
Flap using your other
hand.
Pull the Right Fastening
Flap using your right
hand.
Place your left hand on
the back piece.
