Setting Up ReDS System
24
Patient Setup
This section describes how a healthcare provider should adjust the sensor vest. Each sensor
vest must be adjusted for a specific patient before it is used to measure that patient.
The sensor vest adjustment procedure need be performed for each patient. After the sensor
vest is adjusted for a specific patient, it should be repeated for all his/her future
measurements.
CAUTION:
When using the device with multiple patients make sure to use the vest with proper
disposable infection control garments to protect patients.
If the sensor vest adjustment is modified for any reason, the adjustment procedure must be
repeated in its entirety.
CAUTION:
Each sensor vest adjustment is only intended to be used by the patient for whom it
was set up.
Patient Setup Workflow
The following provides an overview of the steps for setting up a sensor vest for a new patient
and a reference to the sections of this user manual that provide detailed instructions.