Using the SK 9000
SK 9000
| 11
To switch your bodypack transmitter
off
with
the lock mode acti-
vated
:
왘
Press the
ON
/
OFF
button
2
while the standard display is
shown.
“
LOCK
” appears on the display panel because the lock mode is
activated.
왘
Press the
UP
button
8
or the
DOWN
button
6
.
“
UNLOCK
” appears on the display panel.
왘
Press the
SET
button
7
.
The lock mode is temporarily
deactivated, the lock mode
icon
flashes.
왘
Within the next 2 seconds, press
the
ON
/
OFF
button
2
and
keep it pressed until the display panel goes off.
If you switch on the SK 9000, the lock mode is activated again.
Switching on the SK 9000 on and checking the set
frequency before the RF signal is activated
왘
Switch on the SK 9000 by keeping the
ON
/
OFF
button
2
pressed until the “
Name
” standard display appears.
The RF signal is not activated and the transmission mode display
“
HD
”/“
LR
”
flashes.
If you call up the “
Tune
” or “
Preset
” menu item within the next
10 seconds, the RF signal remains deactivated until you exit the
menu item. If you do not call up one of the mentioned menu items,
the RF signal is automatically activated after 10 seconds.
To check the set frequency/the selected frequency preset:
왘
Call up the operating menu and press the
UP
button
8
/
DOWN
button
6
until the “
Tune
” or “
Preset
” menu item
appears.
The set frequency/the selected frequency preset is displayed.
If the displayed value is the desired one:
왘
Wait for 10 seconds to pass.
The RF signal is automatically activated and the transmission
mode display “
HD
”/“
LR
”
lights up constantly.
If the displayed value is
not
the desired one:
왘
Call up the “
Tune
” or “
Preset
” menu item.
The RF signal remains deactivated until you exit the menu item.
왘
Set the frequency (menu item “
Tune
”) or select a frequency
preset (menu item “
Preset
”) and store your setting.
The RF signal is activated and the bodypack transmitter trans-
mits an RF signal on the set frequency.
3:59
480.000
Summary of Contents for SK 9000
Page 1: ...Instruction manual SK 9000...