Using the SK 9000
10 |
SK 9000
Using the SK 9000
Switching the SK 9000 on/off
To switch your bodypack transmitter
on
:
왘
Keep the
ON
/
OFF
button
2
pressed until the Sennheiser
logo appears on the display panel
.
The
ON
LED
3
lights up and the selected standard display (here:
“
Frequency
”, see page 16) appears on the display panel
bodypack transmitter transmits an RF signal and the transmis-
sion mode display “
HD
”/“
LR
”
lights up constantly:
To switch your bodypack transmitter
off
:
왘
Keep the
ON
/
OFF
button
2
pressed until the display panel
goes off.
왘
Remove the accupack/battery pack when the transmitter will
not be used for extended periods of time (see page 8).
Before
using your bodypack transmitter, ask the relevant
wireless regulatory authority for the exact frequency allo-
cations and apply for an individual license if necessary.
The supplied supplement “Framework requirements and
restrictions on frequency usage” provides an overview of
the different European framework requirements and
restrictions on frequency usage. If there is no entry in the
supplement, ask the relevant wireless regulatory authority
for the current rules governing frequency usage.
We recommend you to adjust the transmitter settings via
the operating menu of the EM 9046 receiver and then to
synchronize the transmitter and the receiver.
2
3
C
3:59
480.000
Summary of Contents for SK 9000
Page 1: ...Instruction manual SK 9000...
