![background image](http://html1.mh-extra.com/html/sennheiser/hmdc-hmec-300-400/hmdc-hmec-300-400_instructions-for-use-manual_1240658051.webp)
14
1. Connecting the headset to the on-board system
The NoiseGard™ electronics can be connected to on-board power supply systems with
operating voltages between 12–35 V DC.
Danger of short circuit!
Before turning on NoiseGard™, ensure that the on-board power supply system is
protected by a 1 A fuse.
The HMEC 300, HMEC 305-C, HMEC 322, HMEC 400 and HMDC 322 headsets are supplied
with an XLR-3 socket for panel mounting in the aircraft. The XLR-3 socket must be
mounted by a technician qualified to perform this type of installation.
HMEC 300 and HMEC 400 headsets:
왘
Connect the ¼” (6.35 mm) stereo jack plug for the headphones and the PJ-068 jack
plug for the microphone to the corresponding jack sockets of your intercom.
왘
Connect the XLR-3 plug to the XLR-3 socket.
Power supply for
NoiseGard™
Ground
Do not connect !
XL R-3 socket
HMEC300US.book Se ite 14 Mittwoch, 7. April 2004 3:24 15
Summary of Contents for HMDC HMEC 300 400
