![background image](http://html1.mh-extra.com/html/sennheiser/ew-100-g2/ew-100-g2_instructions-for-use-manual_1241827016.webp)
64
To mount two EM 100 G2 into a rack:
#
Place the two receivers side by side onto a flat sur-
face, their bottom sides facing upwards.
#
Align the connecting plate
A
over the holes in the
bottom sides of the receivers.
#
Secure the connecting plate
A
to the receivers
using eight of the supplied recessed head screws
(M 3x6).
#
Hook the two rack mount “ears”
?
to the front
panels of the receivers.
#
Secure the rack mount “ears” to the receivers using
two of the supplied recessed head screws (M 3x6)
respectively.
#
Slide the receivers into a 19” rack.
#
Screw the rack mount “ears” tight.
When mounting only one receiver into a rack, use the
connecting bar
@
instead of the second receiver.
#
Hook the two rack mount “ears”
?
to the front
panel of the receiver.
#
Secure the rack mount “ears” to the receiver using
two of the supplied recessed head screws (M 3x6)
respectively.
#
Secure the connecting bar
@
to one of the rack
mount “ears”
?
using two of the supplied recessed
head screws (M 6x10).
#
If you are not front mounting the antennas, insert
the two covering plugs
B
into the antenna holes of
the connecting bar.
#
Slide the receiver into a 19” rack.
#
Screw the rack mount “ears” tight.
To mount the receiver’s antenna connection to the
front of the GA 2 rack adapter using the AM 2 antenna
mount:
#
Screw the two BNC sockets
C
of the BNC extension
cables to the connecting bar
@
using the supplied
plain washers and nuts.
#
Connect the two BNC connectors
D
to the BNC
sockets
6
and
8
at the rear of the receiver.
#
Slide the receiver into a 19” rack.
#
Screw the rack mount “ears” tight.
#
Connect the two telescopic antennas
<
to the two
BNC sockets
C
.
#
Pull the telescopic antennas out and align them
upwards in a V-shape.
?
?
A
@
?
?
B
D
C
@
<