![background image](http://html1.mh-extra.com/html/sennheiser/ew-100-g2/ew-100-g2_instructions-for-use-manual_1241827022.webp)
70
Using the components
Switching the components on/off
The ew 100 G2 transmitters and receivers can only be switched off when the
standard display is shown on the display panel. Within the operating menu,
the
ON
/
OFF
button or the
POWER
button
(EM 100 G2 only) serves as the ESC
(cancel) key, i.e you cancel your entry and return to the standard display.
Note:
Remove the batteries or the accupack when the units will not be used for
extended periods of time.
Switching the rack-mount receiver on/off
#
Press the
POWER
button
%
to switch the receiver on.
#
To switch the receiver off, press the
POWER
button until “OFF” appears on
the display.
Switching the bodypack receiver/transmitter on/off
#
Press the two unlocking buttons
>
and open the battery compartment
cover
=
.
#
Press the
ON
/
OFF
button
5
to switch the bodypack receiver/transmitter
on. The red LED
#
lights up.
#
To switch the bodypack receiver/transmitter off, press the
ON
/
OFF
button
5
until “OFF” appears on the display. The red LED
#
goes off.
#
Close the battery compartment. The battery compartment cover
=
locks
into place with an audible click.
Switching the plug-on transmitter on/off
#
Press the
ON
/
OFF
button
=
to switch the plug-on transmitter on. The red
LED
H
lights up.
#
To switch the plug-on transmitter off, press the
ON
/
OFF
button
=
until
“OFF” appears on the display. The red LED
H
goes off.
%
4
3
5
#
2
3