86
... for multi-channel operation
!
For multi-channel operation, you can only use the channels in a channel
bank. Each of the channel banks “1” to “8” accommodates four factory-
preset frequencies which are intermodulation-free. For alternative fre-
quency combinations, please refer to the enclosed frequency table. The fre-
ely selectable frequencies can be selected via the “
TUNE
” menu and can be
stored in the channel bank “U”.
!
When using several transmitters simultaneously, interference can be avoi-
ded by maintaining a minimum distance of 20 cm between two transmit-
ters.
!
Use special accessories for multi-channel applications (see: „Accessories“
on page 93).
Care and maintenance
Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.
To clean the SKM 100 G2’s sound inlet basket, proceed as follows:
#
Unscrew the sound inlet basket (turn counterclockwise) and remove it.
#
Remove the foam insert.
#
Use a slightly damp cloth to clean the sound inlet basket from the inside
and ouside.
#
Reinsert the foam insert.
#
Replace the sound inlet basket on the SKM 100 G2 and screw it tight
(taking care not to loose the colored identification ring).