65
5
Battery status indication
The red LED
5
provides information on the (remaining) battery capacity:
LED lit up:
The transmitter is switched on and the battery capacity is sufficient.
LED flashing:
Th
e
ba
tt
e
r
y
i
s
g
oi
n
g
f
l
a
t
!
You should immediately replace the battery!
Changing the microphone module
!
First remove the battery and leave the radiomicrophone open.
!
Unscrew the sound inlet basket.
!
Loosen the screw and put it aside.
!
Remove the microphone module, as shown. Do not touch the contacts!
!
Insert the new module, secure the capsule by tightening the screw,
put on the suitable sound inlet basket and coloured identification ring
and screw it tight.
!
Insert the battery, close the radiomicrophone and put it into operation.
Note:
Microphone module, sound inlet basket and foam insert form an
acoustic unit and must therefore always be exchanged all together.
Each microphone module comes with a colour-coded identification
ring to distinguish different microphone modules from each other
(green = MD 835, blue = MD 845, red = ME 865).
Summary of Contents for EVOLUTION WIRELESS EW 100
