Sennheiser Digital 9000, Instruction Manual

Page: 53 / 130

Digital 9000 | 51
Using the EM 9046
“ sys ”, “ ch ”, “ live ” – operating modes at a glance
“live” operating mode – Live transmission
In this mode, you can check, among other things, the following parameters
during transmission:
• RF level
• True bit diversity evaluation
• Audio level
• Charge status of the BA/B 60/61 accupack/battery pack
• Remaining operating time of the BA 60/61 accupack
More information on the “ live ” operating mode can be found from page 83
onwards.
“ch” operating mode – Setting up channels
In this mode, you can configure channels on the receiver and then synchro-
nize the transmitters and the receiver. More information on the “
ch ” oper-
ating mode can be found from page 75 onwards.
“sys” operating mode – Configuring the system
In this mode, you can configure transmitters and the receiver. More infor-
mation on the “
sys ” operating mode can be found from page 55 onwards.
Basic functions of the Sennheiser operating menu
A special feature of the Sennheiser 9000 series is the straightforward,
intuitive operating concept. As a result, you can act quickly and precisely –
even in stressful situations, for example on stage or during a live show or
presentation.
Selecting the operating mode
왘
Press the respective button to select the desired operating mode.
Calling up and selecting menu items, changing and storing
settings, cancelling an entry
In “ ch ” and “ sys ” operating mode, the following operating elements are
available:
live
ch
sys
sys ch live
왘
Turn the jog dial to select a different menu item or a different setting.
왘
Press the jog dial to call up a menu item or to confirm a selection.
Jog dial
왘
Press the button
F
to store settings.
button
왘
Press the esc button to cancel entries. esc
esc button