Sennheiser Digital 9000, Instruction Manual

Page: 85 / 130

Digital 9000 | 83
Using the EM 9046
Via the “ Cable ” menu item, you can emulate the lengths of instrument
cables in 3 steps: “ type1 ”, “ type2 ” and “ type3 ”. If you select “ line ”, no
emulation takes place. The input gain in the “ Gain ” menu item is set to the
fixed value of –6 dB.
“ live ” operating mode – Using a configured
system
In “ live ” operating mode, you can select channels for headphone monitor-
ing and synchronize the transmitters and the receiver.
To prepare headphone monitoring:
왘
Connect headphones as described on page 38.
왘
Observe the warnings given there.
To select channels for headphone monitoring:
왘
Select a channel by pressing the channel 1–8 button
M
or press the
multiple channel selection button + and then select several channels
simultaneously.
In “ live ” operating mode, you can also activate channels for synchroniza-
tion:
왘
Select a channel by pressing the channel 1–8 button
M
.
왘
Proceed as described on page 76.
Channel 1–8 button
and
multiple channel
selection button +
+
If you have daisy chained several receivers (see “Daisy chaining
receivers” on page 35), you can monitor any channel of the daisy
chain via any headphone socket in the daisy chain.