Sennheiser Digital 9000, Instruction Manual

Page: 73 / 130

Digital 9000 | 71
Using the EM 9046
“Hw setup” – Displaying the EM 9046’s hardware configuration
and confirming a modified configuration
While the operating system of the EM 9046 starts up, it checks the
receiver’s hardware configuration for modifications. Modifications of the
hardware configuration are indicated by warning messages.
If, for example, a DAO module has been removed, the following warning
message appears:
If you hide this warning message by pressing the esc button
L
, the miss-
ing module is displayed in the “ hw setup ” menu item with the status
“ missing ”:
Modules ok
Hw setup
Modules missing
Hardware setup
Slot Module Type State
RX1 EM 9046 DRX ok
RX2 EM 9046 DRX ok
RX3 EM 9046 DRX ok
RX4 EM 9046 DRX ok
RX5 EM 9046 DRX ok
RX6 EM 9046 DRX ok
RX7 EM 9046 DRX ok
RX8 EM 9046 DRX ok
MAN EM 9046 DAN ok
OUT1 EM 9046 AAO ok
OUT2 EM 9046 DAO missing
ASP EM 9046 ASP ok
Press SET to confirm