Sennheiser ADN CU1, Instruction Manual

Page: 28 / 31

Configuring the conference system
26 | ADN CU1
“ Diagnostics ” menu
“ System Load ” Provides information on the current supply (A), voltage
supply (V) and power (P)
“ Temperature ” Provides information on the temperature status
“ Bus Statistics ” Provides information on the status of data transmission/
errors
“ Start Self-Test ” Performs a self-test on the conference system “ Yes ”/“ No “
“ Reset Break Indication ” Resets the error counter (“ Break Counter ”) in the “ Bus
Statistics ” menu item
“ Yes ”/“ No ”
“ Reset Error Indication ” Resets the display for data bus errors (“ Error Indication ”)
in the “ Bus Statistics ” menu item
“ Yes ”/“ No ”
“ Versions ” menu
“ Hardware Version Info ” Displays the hardware version
“ Software Version Info ” Displays the software version
“ Settings ” menu
“ Network ” Calls up the “ Network ” submenu –
“ Contrast ” Adjusts the contrast of the display panel “ 1 ” ... “ 15 ”
“ Lock ” Activates/deactivates the lock mode “ On ”/“ Off ”
“ Restore Factory Defaults ” Restores the factory default settings “ Yes ”/“ No ”
“ Network ” menu
“ IP Address Mode ” Sets the IP address allocation mode “ Static IP ”/“ Dynamic IP ”
“ IP Address ” Sets the IP address of the central unit “ xxx . xxx . xxx . xxx ”
“ Subnet Mask ” Sets the subnet mask of the central unit “ xxx . xxx . xxx . xxx ”
“ Gateway ” Sets the IP address of a standard gateway
“ xxx . xxx . xxx . xxx ”
Display Function of the menu item Option/display
System Load
No
CU.I :
– –
A V
PS07.II.1 : A
– –
V
PS07 : P
Temperature
No
CU :
PS07 :
PS11 :
Bus Statistics
No
Error Indication :
☺
Break Counter : 1
No
Hardware Version Info
ADN D1/C1: 1
CU1 SB: 1
ADN PS: 1
No
Software Version Info
ADN D1/C1: 0.1.1.5
CU1 SB: 1.0.0.0
CU1 Main: 1.0.0.0