Sennheiser ADN CU1, Instruction Manual

Page: 25 / 31

ADN CU1 | 23
Configuring the conference system
Display Function of the menu item Option/display
“ Main Menu ”
“ Conference Menu ” Calls up the “ Conference Menu ” submenu –
“ Audio Menu ” Calls up the “ Audio Menu ” submenu –
“ Wireless Menu ” Calls up the “ Wireless Menu ” submenu
–
“ System Menu ” Calls up the “ System Menu ” submenu
–
“ *Languages ” Adjusts the language
“ German ”, “ English ”,
“ Espanol ”...
“ Settings ” Calls up the “ Settings ” submenu
–
“ Conference Menu ”
“ Conference Mode ” Adjusts the conference mode
“
Direct Access ”, “ Override ” and “ Push to talk ”: These
conference modes do not require the use of a chairperson
unit. If the maximum number of speakers who can take
the floor simultaneously has not been reached, a further
speaker can take the floor immediately.
“
Request ”: For this mode to function, a chairman unit is
required. The chairperson receives requests to speak and
grants speaking privileges according to the FIFO principle
(First In – First Out), i.e. the participant with the longest
waiting time is granted speaking privileges.
“ Direct Access ”, “ Override ”,
“ Push to talk ” or “ Request ”
“ Microphone Limit ” Sets the maximum number of speakers who can take the
floor simultaneously for all conference modes “ 1 ” ... “ 10 ”
“ Request Limit ” Sets the maximum number of requests to speak for
“
Request ” and “ Direct Access ” mode
“ 0 ” ... “ 10 ”
“ Talk Time Status ” Activates/deactivates the speaking time limit “ On ”/“ Off ”
“ Talk Time Limit ” Sets the speaking time limit “ 01 ” ... “ 60 ”
in steps of 1 minute
“ Premonition Time Limit ” Sets the advance warning time (warns speakers that they
are approaching the end of the individual speaking time) “ 00 ” ... “ 120 ”
in steps of 10 seconds
“ Reaction on Talktime Exceed ” Determines the behavior when the individual speaking
time is exceeded
“
Continue ”: The individual speaking time is continued.
“ Cancel ”: The individual speaking time is terminated.
“ Continue ”/“ Cancel ”
“ Blink on Request ” Activates/deactivates the flashing of the signal light ring
when a request to speak is made “ On ”/“ Off ”
“ Re-Init ” Re-initializes the conference units
If you connect ADN C1 or ADN-W C1 chairperson units to
the conference system during a running conference, you
have to re-initialize them. When conference units are re-
initialized, the conference will be interrupted. “ Yes ”/“ No ”
“ Clear Request List on Cancel ” Sets the function of the priority key of the chairperson
unit
“
On ”: Pressing the priority key deactivates all ADN D1
or ADN-W D1 delegate units. All requests to speak are
deleted.
“
Off ”: Pressing the priority key deactivates all currently
active ADN D1 or ADN-W D1 delegate units. All requests to
speak are retained.
“ On ”/“ Off ”