Preparing the ADN CU1 central unit for operation
12 |
ADN CU1
Preparing the ADN CU1 central unit for
operation
Setting up the central unit on a flat surface
왘
Make sure that the air vents are not covered or blocked.
왘
Place the central unit on a flat surface as shown.
Connecting the central unit to the mains power supply
왘
First connect the connector of the mains cable (supplied) to the mains
socket
.
왘
Connect the mains plug (EU, UK or US plug) of the mains cable to the mains
power supply.
The ADN CU1 central unit is now ready for operation.
For information on how to mount the central unit
into a 19” rack
, refer to
the ADN system manual.
CAUTION
Product damage due to unsuitable mains cables or power outlets!
An unsuitable power supply can damage the product.
왘
Only use the mains cable (supplied) for connecting the product to the mains
power supply.
왘
Only use multi-outlet power strips or extension cables with protective ground
contacts.
왘
Only use mains cables with a 3-pin connector.
100-240V~
50/60Hz 240W
D
15
D
Summary of Contents for ADN CU1
Page 1: ...Instruction manual Control Unit ADN CU1 ...
Page 2: ......
