ADN CU1
| 11
Structuring and controlling the conference system
Configuring and controlling the conference system
For configuring the conference system, you can either use the operating menu of
the central unit or the “Conference Manager” software. However, the full function-
ality of a wireless conference system can only be configured using the “Conference
Manager” software. The software also allows you to control and monitor confer-
ences via a graphical interface.
The “Conference Manager” software
can be run in two different ways:
1. As a program on the central unit’s built-in PC
You have to connect a screen, keyboard, and mouse to the central unit (see
page 17).
2. As a program on a Windows PC
You have to install the “Conference Manager” software
on the PC and integrate
the PC together with the central unit in a network (see page 17).
Input and output of audio signals
Via XLR sockets, you can feed audio signals to the floor channel or output the floor
channel.
For recording a conference on a USB mass storage device, you can use the recording
function of the ADN CU1 central unit, which saves the floor channel and all channels
of the conference units as audio files in wav format.
Integration into a media control system
The ADN conference system can be completely integrated into a media control sys-
tem. You can monitor and control all functions of the conference system via the
programmable commands of your media control system. For information on the
integration into a media control system, refer to the ADN system manual.
Conference Manager
software
ADN CU1
1
2
For information on the installation and use of the “ADN Cable Calculator”
software, refer to the ADN system manual.
Summary of Contents for ADN CU1
Page 1: ...Instruction manual Control Unit ADN CU1 ...
Page 2: ......
