![background image](http://html1.mh-extra.com/html/sennheiser/adn-cu1/adn-cu1_instruction-manual_1239911018.webp)
Setting up the conference system
16 |
ADN CU1
Setting up a wireless conference system
For operating the wireless conference units, you require one ADN-W AM antenna
module.
Connecting the ADN-W AM antenna module to the ADN CU1 central unit
왘
Use a system cable (supplied with the ADN-W AM; the maximum cable length
allowed is 50 m) to connect the
PORT II
socket
or
PORT I
socket
of the
ADN CU1 central unit to the input socket
of the ADN-W AM antenna
module.
If the power supplied to the antenna module via the system cable is not suf-
ficient, you have to power the antenna module using the NT 12-50C power
supply (detailed information can be found in the ADN system manual).
You can also connect the ADN-W AM antenna module to the
PORT
sockets
of an ADN PS power supply. It does not matter if you are using a string or
ring topology. The antenna module is connected just like a conference unit
to the cable string or cable ring.
8
9
4
PORT II PORT I
ADN CU1
IN –– AUDIO –– OUT
PORT II PORT I
100-240V~
50/60Hz 240W
2x 52.8V
1.75A
8
9
ADN-W AM
4
3
Summary of Contents for ADN CU1
Page 1: ...Instruction manual Control Unit ADN CU1 ...
Page 2: ......