Sennheiser ADN CU1, Instruction Manual

Page: 21 / 31

ADN CU1 | 19
Using the ADN CU1 central unit
Switching off the conference system
왘
Set the on/off switch of the ADN CU1 central unit to position “ 0 ”.
The central unit is switched off and the display panel goes off. If ADN PS power
supplies are connected to the central unit and switched on, they are switched
off and the status LEDs go off. If an ADN-W AM antenna module is connected
to the central unit, it is also switched off.
To completely switch the ADN CU1 central unit off :
왘
Pull out the mains plug from the wall socket.
Deactivating the lock mode of the central unit
If the lock mode is activated, you have to deactivate it in order to be able to operate
the central unit:
Functions of the keys
If you have made changes to a configuration using the “Conference Man-
ager” software, you have to save these changes before switching the cen-
tral unit off. All other settings of the central unit are automatically saved.
1
왘
Press the jog dial or any other key.
“
Lock ” appears on the display panel.
왘
Turn the jog dial.
The “
Off ” setting is selected.
왘
Press the jog dial.
The lock mode is deactivated.
Action Functions
Press the ESC key • Cancels the entry and returns to the next higher
menu level or to the standard display
Press the jog dial • Changes from the standard display to the
operating menu
• Calls up a menu item
• Enters a submenu
• Stores the settings and returns to the operating
menu
Turn the jog dial • Increases or reduces the floor channel volume
(when the standard display is shown)
• Changes to the next/previous menu item
• Changes the setting of a menu item
Press the standard
display key
• Returns to the standard display