•
Load(L)
– Load the installed settings
•
Save(S)
– Save the current settings
•
Exit(X)
– Finish the work and end the
program (close the tap)
•
Calibration(C)
– Open the calibration
window to start calibration process
•
Log Read(R)
– Retrieve and save the log
events
•
Log Erase(E)
– C
lean all the logs from the
storage (erased logs cannot be recovered)
•
FW Upgrade(U)
– Open the firmware
upgrade window to start upgrading process
•
Self Test(S)
– Automatic self diagnose of the
unit
Test order: LED
→ Beep → Motor → Flash
→ Sensor → End
•
Factory Default(F)
– Reset original settings
and specifications
•
Time Write(T)
– To set a time by user
location (see 8.2.3.1.)
•
Power OFF(P)
– Turn off the device
•
IAP Version Read(I)
•
Now Time
– When click “Now Time”
button, automatically sets the current time
on the PC of the operator. The initial time
is preset in the factory in South Korea, so
to apply the time in your location,
press “Now time” and press “time write”.
•
Time Write
– By clicking “Time Write”
button, selected and customized time will
set.
5.2.1. Menu
– File
5.2.2. Menu
– Tools
5.2.3. Menu
– Device
5.2.3.1. Menu
– Device
15
5.2. Window menu
5. Software Manager
