User Manual
R-GWR SERIES
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI00568-1-EN
Page 5
INTRODUCTION
1.
ATTENTION!
This user manual extends the information from the installation manual to the configuration of the
device. Use the installation manual for more information.
ATTENTION!
In any case, SENECA s.r.l. or its suppliers will not be responsible for the loss of data/revenue or
consequential or incidental damages due to negligence or bad/improper management of the device,
even if SENECA is well aware of these possible damages.
SENECA, its subsidiaries, affiliates, group companies, suppliers and distributors do not guarantee that
the functions fully meet the customer's expectations or that the device, firmware and software should
have no errors or operate continuously.
DESCRIPTION
1.1.
The R-GWR gateway is a device capable of receiving information from radio sensors and making it available
both through the S485/RS232 serial port and through the Ethernet port.
Model
Description
Communication protocols
R-GWR
Radio Gateway with 1 serial port and
1 Ethernet port.
Max 32 Lora sensors.
Modbus TCP-IP
Modbus RTU