12
TD140-038.11 | Version 1.1 | 22 March 2019
3.1.2 Control elements and indicators
Element
Designation
Description
Display
The display shows you the status messages and operat-
ing modes. The display is located on the front side of the
SENEC.Home Li, at the top.
A description of the viewed contents is found in Chapter
4.4 Reading status indicators on the front display, page
DC isolating switch
The DC isolating switch disconnects the battery mod-
ule from the SENEC.Inverter (battery inverter). The
battery is connected to the system when the switch
is in the "ON" position. When the switch is in the
OFF position, the battery is isolated from the sys
-
tem and is being neither charged nor discharged.
CAUTION: After disconnecting the DC isolating switch, wait
at least 60 seconds before reconnection!
Instruction!
The DC isolating switch is not a main switch. After disconnecting the DC power, the lithium
modules continue their operation. An emergency charge is not allowed. This may lead to the deep
discharge of the module.
ä
For the complete disconnection from the power supply, disconnect the battery module via the
"Switch-off" function (see Chapter 4.1.2 Front display operation, page 17) and the B 16 A
domestic fuse.
Instruction!
ä
Do not use the DC isolating switch for restarting the SENEC.Inverter.
OK
ESC
Passive
Charge
Discharge
Error
I
ON
O OFF
