SMD 989
– User Manual
Page 25 (105)
Each input port listing or section contains an active input bitrate indication on the right side of the
section. When the input is enabled and an active transport stream is present on that input, the
bitrate counter indicates the incoming bitrate in Mbps.
Each input port listing contains a status indicator light near the right side of the listing. If the port
is enabled and no sync is detected, an error will be indicated by a red light. Errors can be user
enabled/disabled if desired. Please see the Alarm/Logs Section for details. The chart below
describes the status indicator lights.
Green LED
Status is good. No errors are present and
function is operating normally.
Red LED
Status indicates input is active but with
active error(s). View errors in the
Alarms/Logs menu
Grey LED
Input is inactive and/or alarms are inactive
Figure 18: ASI configuration
