SMD 989
– User Manual
Page 95 (105)
Appendix
Specifications
SMD 989 Base Unit Includes
:
Display, keypad, embedded controller,
Chassis/case, Power Supply/line cord
System
–
Display Type:
Organic LED
Display Configuration:
256 pixels by 64 pixels
Keypad:
Snap-dome Membrane
Front Panel Lockout:
Password control, up to 10 alpha-numeric
characters (no punctuations or spaces allowed)
Configurations Allowed:
Single Bay
Dual Bays
Rear panel:
2 independent bays
Remote Operation/Update Interface
–
Type:
Ethernet, 10/100
Rear panel indicators:
Link (Green LED), Activity (Amber LED)
Connector:
RJ45
Front Panel Indicators
–
Input LED:
Green indicates valid input on selected input,
Off indicates no valid signal on the selected input
Error LED:
Red indicates error is occurring
OFF indicates no errors detected
10 MHz Reference Input
–
Connector:
(1) BNC, female
Impedance:
50 ohms
Min Level:
-3 dBm
Max Level:
7 dBm
Detection:
Autosensing
Return Loss:
>15 dB
Monitor and Control Interfaces
–
Web server GUI
HTTP via web browser for Control & Monitoring
Front Panel
Yes Control & Monitoring
SNMP
Yes Control & Monitoring
Contact Closure Interface
–
Type:
(2) Electrical contact closure alarm contacts
Connector:
Connector 9-pin sub-D Female
Alarms supported:
User configurable to any alarm in system
Specifications are subject to change without notice.
