background image

EN - 17

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF 

USED PACKAGING MATERIALS

Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging 

indicates that this product shall not be treated as household waste. Please, 

dispose of this product at your applicable collection point for the recycling 

of electrical & electronic equipment waste. Alternatively in some states of 

the European Union or other European states you may return your products 

to your local retailer when buying an equivalent new product. The correct 

disposal of this product will help save valuable natural resources and help 

in preventing the potential negative impact on the environment and human 

health, which could be caused as a result of improper liquidation of waste. 

Please ask your local authorities or the nearest waste collection centre for 

further details. The improper disposal of this type of waste may fall subject to 

national regulations for fines.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the 

necessary information from your seller or supplier. 

Disposal in other countries outside the European Union

 

If you wish to dispose of this product, request the necessary information 

about the correct disposal method from local government departments or 

your seller.

The product meets EU requirements.

Hereby, FAST ČR, a.s. declares that the radio equipment type SWS 7300 is in 

compliance with Directive 2014/53/EU.

For the full version of the EU declaration of conformity, please refer to the following 

website: www.sencor.com

Changes in the text, design and technical specifycations may change without prior notice 

and we reserve the right to make these changes.

The original version is Czech. 

Manufacturer: FAST ČR, a.s., Černokostelecká 1621, Říčany CZ-251 01

 04/2020

 © 2020, 

Summary of Contents for SWS 7300




















Reviews: