Sencor SWS 7300, Instruction Manual

Page: 7 / 19

EN - 7
D/M M/D
M/ D
CH 1 CH 6 CH 1
RECEPTION OF RADIO CONTROLLED SIGNAL
The time and date are radio-controlled. The current time and date are automatically
synchronized with the signal that transmitted from RC station through wireless sensor.
Please make sure the bundle wireless sensor is connected to the main unit.
RCC SIGNAL STRENGTH INDICATOR
The signal indicator shows signal receive status. Flashing wave segment means RCC
signals are being received. The signal receiving status could be classified into 2 types:
D/M M/D
M/ D
D/M M/D
M/ D
No RCC signal received Received RCC signal
NOTE:
- Every day the wireless sensor will automatically search for the time signal at 2:00 and
17:00.
- Always place the unit away from interfering sources such as TV set, computer, etc.
- Avoid placing the unit on or next to metal plate.
- Closed area such as airport basement, tower block or factory is not recommended.
- Do not start reception on a moving article such as vehicle or train.
DAYLIGHT SAVING TIME (DST)
This clock has been programmed to automatically switch when the daylight saving time is
in effect. User can disable the DST function in time and calendar setting mode.
NOTE:
DST AUTO/OFF setting only available when RCC function is ON.