background image

EN - 14

 

 

 

 

 

                                                                                                                          

High humidity alert on

High temperature alert on

 NOTE:

-  You cannot enter conflicting HI / LO values in the setting. For example, if the HI 

temperature alert value is 40°C, you cannot enter more than 39.9°C for the LO alert, 

and so forth.

-  When the alert is triggered, the alarm will sound and the alarm icon on the display will 

flash. Press 

[ALARM / SNOOZE]

[ALARM] 

or 

[ALERT] 

key to stop the alarm sound. 

If you ignore the alarm, it will stop after 2 minutes.

-  When auto-cycle mode, if any alarm is triggered the display will switch to the 

regarding channel. You can press 

[ALARM / SNOOZE]

[ALARM] 

or 

[ALERT] 

key 

or leave the unit for 2 minutes to stop the alarm. The display will return to auto-cycle 

mode afterwards.

MOON PHASE

The main unit can show the northern hemisphere moon phase status, below is the table 

which illustrate how the moon will appear on the main unit

Northern hemisphere

Moon Phase

 

 

                                                                                                                          

New Moon

 

 

                                                                                                                          

Waxing Crescent

 

 

                                                                                                                          

First quarter

Summary of Contents for SWS 7300




















Reviews: