Sencor SWS 7300, Instruction Manual

Page: 11 / 19

EN - 11
THE SNOW ICON
When the outdoor temperature is 3°C or below, the
flashing snow icon “ ” will appear in outdoor section.
WEATHER FORECAST
The device contains sensitive pressure sensor built-in with sophisticated and proven
software that predicts weather for the next 12 ~ 24 hours within a 30 to 50 km (19-31
miles) radius.
Sunny / Clear Slightly Cloudy Cloudy Rainy Snowy
NOTE:
1. The weather forecast is meant for the next 12 - 24 hours, it may not necessarily
reflect the current situation.
2. The weather icon will flash on display when the rainstorm comes.
3. The SNOWY weather forecast is not based on the atmospheric pressure, but based
on the outdoor temperature. When the outdoor temperature is below -3°C (26°F), the
SNOWY weather indicator will be displayed on the LCD.
BAROMETRIC/ATMOSPHERIC PRESSURE
TO SELECT THE PRESSURE DISPLAY MODE
1. Press and hold the
[BARO]
key for 2 seconds to enter select model:
2. Press [CH / +] key or [MEM / -] key to select between:
- abs --- the absolute atmospheric pressure of your location.
- rel --- the relative atmospheric pressure based on the sea.
3. In “abs” mode, press [BARO] key to exit, In “rel” mode, press [BARO] key to set
relative atmospheric pressure value in next section.
TO SET RELATIVE ATMOSPHERIC PRESSURE VALUE
1. Get the atmosphere pressure data of the sea level (it is also the relative atmosphere
pressure data of your home area) through the local weather service, internet and
other weather channels.
2. Press and hold the [BARO] key for 2 seconds until abs or rel icon flashes.
3. Press [CH / +] key or [MEM / -] key to switch to RELATIVE mode.