ENGLISH
808-000-000
Sematic Drive System
©
30
w w w. s e m a t i c . c o m
© SEMATIC
z
All rights reserved
Changes can be made without notice
see
www.sematic.com
for latest release
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
Å
and
Æ
run through the menu "PROFILE SETTING" and choose the option
“SET FACTORY DEFAULT”.
•
Using the "OK" key, confirm the option
8.7 Option "Manufacturer Menu"
•
Connect the handset to RJ45 connector
•
If necessary, using keys
Å
and
Æ
choose the required language and confirm with the
"OK" key or confirm the suggested language with "OK"
•
Using keys
Å
and
Æ
run through the MAIN MENU and choose PROFILE SETTING
•
Press the "OK" key to confirm the option
•
On the display the following options are viewed:
•
FAST SETTING
•
REVERSING SYSTEM FORCE
•
ADVANCED SETTINGS
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
Å
and
Æ
run through the menu "PROFILE SETTING" and choose
the option MANUFACTURER MENU
•
Using the "OK" key, confirm the option
After confirming the choice by pressing the "OK" key, a 5-code password is required on the
display. This selection is reserved for factory use only.
Use keys
Ã
and
Ä
to insert the codes; to select the required code and modify its value use
keys
Å
and
Æ
.
8.8 Option "Advanced Settings"
•
Connect the handset to RJ45 connector
•
If necessary, using keys
Å
and
Æ
choose the required language and confirm with the
"OK" key or confirm the suggested language with "OK"
•
Using keys
Å
and
Æ
run through the MAIN MENU and choose PROFILE SETTING;
•
Press the "OK" key to confirm the option
•
On the display the following options are viewed:
•
FAST SETTING
•
REVERSING SYSTEM FORCE
•
ADVANCED SETTINGS
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
Å
and
Æ
run through the menu "PROFILE SETTING" and choose the
option ADVANCED SETTINGS
•
Using the "OK" key, confirm the option
After confirming the choice by pressing the "OK" key, a 5-code password is required
on the display. The factory default access code is 00001.
Use keys
Ã
and
Ä
to moves to different digits and to select the necessary coded digit use
keys
Å
and
Æ
; Press OK at the end.
The following options are viewed on the display:
•
OPENING PARAMETERS
•
CLOSING PARAMETERS
•
SERIAL BUS SETTING
•
CHANGE PASSWORD
•
SAVE SET DATA
•
RECALL SET DATA
•
Using keys
Å
and
Æ
run through the menu and choose the required option
•
Using the "OK" key, confirm the option