SEM The Vending Tester PRO CT3, Instruction Manual

Page: 21 / 32

21
Status report:
Changer level 3
Coin type credit and routing:
Coin type 00 value 0005¢ to tube
Coin type 01 value 0010¢ to tube
Coin type 02 value 0010¢ to cashbox
Coin type 02 value 0010¢ to cashbox
Coin type 03 value 0025¢ to tube
Coin type 04 value 0025¢ to cashbox
Coin type 05 value 0100¢ to tube
Coin type 06 value 0100¢ to cashbox
Coin type 07 value 0200¢ to tube
Coin inventory in tubes:
000 coin(s) in tube 0005¢
000 coin(s) in tube 0010¢
000 coin(s) in tube 0025¢
000 coin(s) in tube 0100¢
000 coin(s) in tube 0200¢
Optional features supported:
Alternative payout method
Extended diagnostic command
Controlled manual fill/payout command
Optional features not supported:
File transport layer (FTL)
End of status report
MDB Status
The MDB status button is an interesting feature that will enable you to
find the exact configuration of your coin changer * and its current level
of coins in the tubes. Depending on the country configuration of the
coin changer, the brand and model, the description will vary. That
status report is printed when a serial printer (9600, N, 8, 1) is con-
nected to the port. Press and hold the MDB Status button for 3 sec-
onds.
* Note as well that
other MDB devices such
as a cashless system and
a bill validator will also
give you information
about
their status.
Some of those features
may for example be mul-
tivending within a single
session in the case of a
cashless device or the
security level of each bill
type in the case of a bill
acceptor.
* Redactor’s note: SEM
does not endorse, nor
support
any specific
brand of coin changer,
bill acceptor, or card
reader. We took this
coin changer as an ex-
ample simply because it
was the closest available
the day we wrote this
manual.