19
Printed report in AUTO-TEST
If you have connected a small serial printer (9600, N, 8, 1) to the out-
put port, a report will come out automatically. Below is an example of
report coming from a Coinco Quantum 700 Series* .
CT3 Tester PRO v1,5 Test report
Device tested: MDB Changer Level 3
Information sent by the changer:
Country currency code: 0001
Coin scaling factor: 005
Decimal place: 2
Coin type credit and routing:
Coin type 00 value 0005¢ to cash box
Coin type 01 value 0005¢ to tube
Coin type 02 value 0005¢ to cash box
Coin type 03 value 0010¢ to cash box
Coin type 04 value 0010¢ to tube
Coin type 05 value 0025¢ to cash box
Coin type 06 value 0025¢ to tube
Coin type 07 value 0025¢ to cash box
Coin type 08 value 0100¢ to cash box
Coin type 09 value 0100¢ to tube
Coin type 10 value 0200¢ to cash box
Manufacturer code - CAI
Serial number: 00 36001206
Model #/tuning revision: CAQ701R01AE1
Software version: 0,08
Optional features supported:
-Alternative payout method
-Extended diagnostic command
Optional features not supported:
-Controlled manual fill/payout commands
-File transport layer (FTL)
Coins accepted: 100% Coins rejected 000%
-Escrow lever was activated
-No error message reported by the device
End of test report
* Redactor’s note: SEM does
not endorse, nor support any
specific
brand
of
coin
changer, bill acceptor, or card
reader. We took this coin
changer as an example sim-
ply because it was the closest
available the day we wrote
this manual.
Summary of Contents for The Vending Tester PRO CT3
Page 1: ...Last revision April 2012...
Page 2: ...2...
Page 6: ...6 Identification of the control panel on the CT3...
Page 27: ...27 EBVM Pin out specifications...
