SELF-GUARD SG-1000, Manual

Page: 34 / 116

34
You can check on the camera’s recording location, and the operating status of it with
the Self-Guard’s LCD. When using multiple cameras, you can see up to 4 images
simultaneously from the LCD. Every time you press [ ] in “
▽
2.CAMERA” mode, the
image from each channel, which is turned on, appears in order. After the last channel
shows up on the screen, it changes into 4 channel mode automatically, and displays
four images from different cameras at once.
You can take a snapshot like with a digital camera by pressing [ENT] in this mode. The
file name is ‘*.sgp’. You can check on the snapshot file from “SEARCH” mode. In
“SEARCH” mode, after stopped from playing, you can go to magnification mode by
pressing [ ] and then you can get a larger snapshot image by pressing [ENT]. The △
image is magnified by 4 times (width x 2 and length x 2) for the 240x240 or the
320x240 pixels of resolutions. And if the resolutions are 480x480 or 640x480 pixels,
then they are magnified by 16 times (width x 4 and length x 4). You cannot magnify the
images in the 128x128 or 160x128 pixels of resolutions. In magnified state for the
images, you can use the direction buttons to move to certain portion in the screen.
Press [ESC] to escape from the magnification mode. You can use this magnification
mode in the case that “1.MON OUT” (“4. OPTION” mode → “9.OHERS” → “2.EXT
MON SET”) is set to OFF.