SELF-GUARD SG-1000 Manual Download Page 5

Page: 5 / 116

<< Copyright Restrictions >>

Except for the security purpose, unauthorized copy, reproduction and

circulation of snapshot or movie files violate copyright and international

contract laws. Distribution to third parties of such files over the Internet

without permission of the copyright holder, whether or not for profit violates

international contract law and strictly prohibited.

<< Important Notice >>

The contents of this manual are subject to change without notice.

STARNEX CO., LTD. has the responsibilities as the manufacturer of Self-

Guard to tell each distributor that using the Self-Guard unit in the public

domain may be in violation of federal privacy statues.

STARNEX CO., LTD. assumes no responsibility for any damage or loss

resulting from the use of this manual.

STARNEX CO., LTD. assumes no responsibility for any loss or claims by third

parties which may arise through the use of the Self-Guard.

STARNEX CO., LTD. assumes no responsibility for any damage or loss

caused by deletion of data as a result of malfunction, repairs, or battery

replacement. Be sure to back up all import data on other media to protect

against its loss.

Note that the example screens and product illustrations shown in this User’s

Guide may differ somewhat by the screens and configuration of the actual

product.

The buttons and functions, which are not explained in this manual, are aimed

to improve the functions in the future.

The features of this product can be changed at any time without notice for the

purpose of improvement of the product.

Summary of Contents for SG-1000





















































































































Search results

Summary of Contents for SG-1000

Reviews:

Related manuals for SG-1000

Brands by name

Popular brands

SELF-GUARD SG-1000, Manual

Search results

Summary of Contents for SG-1000

Reviews:

Related manuals for SG-1000

Brands by name

Popular brands