SELF-GUARD SG-1000 Manual Download Page 77

Page: 77 / 116

as soon as it detects audio sound even when it is in the sleep mode. In this mode, Self-

Guard is programmed to record with any audio detection, so you should be careful in

turning this function to ON in a loud place to prevent from wasting the battery.

When this function is set to CON:

Self-Guard is programmed to record constantly regardless of audio or motion detection.

In this mode, battery gets consumed very fast requiring your attention. You are

recommended to use this mode only when you need to record very small audio sound

under the possible level of audio detection.

4-9-3-8. DET. LEVEL: 1

Select audio detection level from 1 to 26. Lower the level for this function, it will detect

smaller sound. If you want to set the unit to record on loud audio detection, increase

the level to large numbers. If you set this level to a low value in a place with loud noise,

then Self-Guard will detect the noise as audio and thus record this noise. Test before

setting this level to avoid detecting and recording of noise.

4-9-3-9. ON/OFF INFO

It shows 10 last history of power ON/OFF. The date and time is recorded for each

power on and off. If the power of the Self-Guard is gone abnormally such as, detaching

the battery from the Self-Guard during the operation, then the Self-Guard will not

record it in the power off history. This information will tell you either Self-Guard was

turned on and off properly or not properly either by user or somebody else.

Summary of Contents for SG-1000





















































































































Search results

Summary of Contents for SG-1000

Reviews:

Related manuals for SG-1000

Brands by name

Popular brands

SELF-GUARD SG-1000, Manual

Search results

Summary of Contents for SG-1000

Reviews:

Related manuals for SG-1000

Brands by name

Popular brands