INSTRUCTION MANUAL CODE 80196 REV B
October 2019
(It can be modified without notice)
Page: 37
J
.P. SELECTA s.a.u.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta @jpselecta.es - website: http://www.jpselecta.es
8 Maintenance
Maintenance operation on the DET GRAS N (2 or 6 places) must be properly run in
order to keep the safety degree, and specially to avoid any solvent leakage.
8.1 Unit cleaning
Use only a humid wash-cloth (small quantity of soap) to general clean the unit.
Dry quickly any leakage of solvent.
8.2 Replacing gaskets
Review the gasket each month or whenever a solvent leakage appears.
Change it if they are not flat and flexible.
8.3 Hose replacing
Use silicone hose Ø 14x8 to replace the coolant water hoses. Usually this hose must
be replaced after changing a glass column.
8.4 Fuse replacing
Fuse are into the rear IP65 waterproof box. (See Fig 8.2).
Unplug the unit from the mains before open the IP65 box.
8.5 Storing the unit
Do not store the unit for a long time with solvent inside.
8.6 Preparing the unit for transportation
Do not transport the unit with solvent inside.
Fig 8.2 Remove the 4 screws to open
the IP65 box and change the fuse.
CAUTION
Before any work inside the equipment, disconnect it from the mains
8.7 Spare parts
For repair and replace deteriorated parts, please contact J.P. Selecta s.a.u. or
your distributor. They will inform you about the technical services authorized in
your area.
Find a spare parts list for easy buying and identifying.
28105
PTFE condensation disk.
28107
Magnet for extraction thimble.
28118
VITON gasket.
28120
BUTYL gasket.
28191
PTFE spout.
29513
Control board.
29514
6 places power board.
29521
2 places power board.
39281
Heating element 100W 230V.
46041
Silicone 8x14 hose
47049
Glass extraction column.
47049
Fig 8.1 Gasket
