Selco Genesis 3000 MTE, Instruction Manual

Page: 64 / 388

64
8 TECHNICAL SPECIFICATIONS
GENESIS 3000 MTE / GENESIS 3000 PMC / GENESIS 3000 SMC
MIG/MAG TIG MMA
Power supply voltage U1 (50/60Hz) 3x400/230Vac 3x400/230Vac 3x400/230Vac
Zmax (@PCC)
*
56m Ω 56m Ω 56m Ω
Slow blow line fuse 16/25A 16/25A 16/25A
Communication bus DIGITAL DIGITAL DIGITAL
Maximum input power (kVA) 10.9/11.48 kVA 9.1/9.2 kVA 10.9/11.48 kVA
Maximum input power (kW) 10.2/10.93 kW 8.56/8.8 kW 10.2/10.93 kW
Power factor PF 0.95 0.95 0.95
Efficiency ( μ ) 85% 85% 85%
Cos
ϕ
0.99 0.99 0.99
Max. input current I1max 16.1/32.3A 16.1/32.3A 16.1/32.3A
Effective current I1eff 9.5/19A 9.5/19A 9.5/19A
Duty factor (40°C)
300A (40%)/300A (30%) 320A (40%)/320A (30%) 280A (50%)/280A (40%)
(x=60%) 270A/260A 300A/290A 260A/240A
(x=100%) 240A/230A 270A/260A 220A/180A
Duty factor (25°C) (x=100%) 260A / 260A
Adjustment range I2 3-300A 3-300A 3-300A
Open circuit voltage Uo 80Vdc 80Vdc 80Vdc
Peak voltage Up (G 3000 MTE) 10.1kV 10.1kV 10.1kV
IP Protection rating IP23S IP23S IP23S
Insulation class H H H
Dimensions (lxdxh) 685x305x535 mm 685x305x535 mm 685x305x535 mm
Weight 32 kg. 32 kg. 32 kg.
Manufacturing Standards EN 60974-1/EN 60974-3 EN 60974-1/EN 60974-3 EN 60974-1/EN 60974-3
EN 60974-5/EN 60974-10 EN 60974-5/EN 60974-10 EN 60974-5/EN 60974-10
Power supply cable 4x4 mm2 4x4 mm2 4x4 mm2
Length of power supply cable 5m 5m 5m
*
This equipment complies with EN/IEC 61000-3-11.
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.