14.TROUBLESHOOTING GUIDE
Before requesting service, please check your stopwatch following the table below.
Problem
Possible cause
Solution
Problem
Possible cause
Solution
The motor does not run
even if the power switch
of the printer is turned
"ON".
The
paper
is
not
advanced by pressing
the paper advancing
switch.
By pressing the start
button, the paper is
advanced,
but
the
printed digits or letters
are detective or the data
are not printed at all.
●Weak batteries.
●The batteries are not
installed properly.
●The paper is stuck.
●Weak batteries.
●The paper is stuck.
●The roll paper gets out
of shape.
●The cord is not con-
nected properly.
●Water
or
foreign
matters are sticking to
the cord plug.
●The paper is not set
properly.
●Replace the batteries
with new ones.
●Install the batteries
properly.
●Remove the paper.
●Replace the batteries
with new ones.
●Remove the paper.
●Make the roll paper
round.
●Connect
the
cord
correctly.
●Wipe off the water or
foreign matters.
●Inset
the
paper
properly.
By pressing the start
button, the data are
printed out, but the paper
is not advanced irregu-
larly.
By pressing the start
button, no data are
printed out and the paper
is not advanced at all.
Auto start time is not
transferred.
●The paper is stuck.
●Weak batteries.
●Weak batteries.
●The batteries are not
installed properly.
●The power switch of
the printer is not set to
"ON".
●The cord is not connect-
ed properly.
●Water or foreign matters
are sticking to the cord
plug.
●Remove the paper.
●Replace the batteries
with new ones.
●Replace the batteries
with new ones.
●Insert
the
batteries
correctly.
●Turn the power switch
"ON", and then press the
start button.
●Connect the cord prop-
erly.
●Wipe off water or for-
eign matters.
＊For the solution of trouble other than the above, contact the retailer from whom the watch was purchased.
73
本 社 〒105-8467 東京都港区虎ノ門2-8-10
http://www.seiko-watch.co.jp/
東京都千代田区丸の内 3-1-1 国際ビル
大阪市西区新町 1-4-24 大阪四ﾂ橋新町ビルディング
100-0005
550-0013
〒
〒
お客様相談室
全国共通フリーダイヤル
0120-612-911
15.SPECIFICATIONS
(Stopwatch)
１.Frequency of crystal …………………32,768Hz (Hz＝Hertz…Cycles per
second)
２.Loss/gain ………………………………Less than 15 seconds at normal
temperature range (5℃〜35℃)
３.Operational temperature ……………−10℃〜＋60℃
Desirable temperature ………………０℃〜＋50℃
range of use
４.Display system ……………………… Stopwatch display
Measures up to
10 hours. Hour, minutes, seconds,
1/100 seconds, tnree-row display of
split time/lap time/total elapsed time or
lap time in progress. No. of blocks, no.
of split times (0〜999), 300 memory
recall, BLOCK, SPLIT, LAP, STOP,
RECALL, stopwatch marks, memory
indicator, BATT.
Time/calendar display Hour (24hour
indication), minutes, seconds, year,
month, date and calendar mark, ID no.
(OFF/01〜99), contrast adjustment
display.
Auto start set display AS, OFF, ON,
hour, minutes, seconds, 1/100
seconds, auto start set mark.
５.Display medium ………………………Nematic Liquid Crystal, FEM (Field
Effect Mode)
６.Battery …………………………………Lithium battery SB-T74, 1 piece
７.Battery Life ……………………………A new normal battery will last
approximately three years.
＊
If the stopwatch is used for more than 3
hours a day, the battery life may be less
than 3 years.
８.IC (Integrated Circuit) ……………C-MOS-LSI, 1 piece
９.Battery life indicator ……………"BATT" mark start flashing when
the battery life nears its end.
(Printer)
１.Printer ……………………………Model: MTP102
Printing system: Thermal serial dot
printing system
Printing method: One-way printing
(from left to right)
Printing speed: Approx. 1.5
lines/sec. (DC 5 0V. at 25℃)
Number of digits printed: 13
digits/line (including space)
２.Recording paper …………………Roll paper S-950
38mm (width) (＋ 0〜 0.5mm),
overall length 2,400 mm or more
(approx. 700 lines can be printed
per roll.)
３.Power supply ……………………DC 6.0V (SUM-3 or AM3 dry
battery, 4 pieces)
With power switch turned "ON" (No
printing) : Approx. 0.02W (DC 6.0V)
４.Power consumption
……………During printing: Approx. 1.5W (DC
6.0V)
５.Battery life
………………………Manganese battery: Approx.
10,000 lines can be printed.
(Equivalent to approx. 14 rolls)
Alkaline manganese battery:
Approx. 20,000 lines can be
printed. (Equivalent to approx. 28
rolls)
６.Operational temperature range…0℃〜40℃ (The depth of printout
does not change even if the
temperature changes.)
＊The above specifications are subject to change without prior notice, for
product improvement.
oscillator
(monthly rate)
range.
74
