ID
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Seconds setting
９.TIME・CALENDAR SETTING
Caution ! Time/calendar setting and identification number setting can be
made only when the stopwatch is reset.
１.Press mode selection button ③ (TIME) to set the time to the
Time/calendar mode.
F
E
300LAP
／
SPLIT MEMORY
LOCK
LAP
／
SPLIT
RESET
START
STOP
CLEAR
1/100
STOP.W A/S SET
TIME
RECALL
STOP-W. A/S SET TIME
ID
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Button ○
Ｂ
Selection of the
digits to be
adjusted.
Button ○
Ａ
Setting the digits to be
adjusted.
（The digits can be advanced
quickly by keeping the
button pressed.）
Mode select ion button ③ (TIME)
２.
□
１
Press ○
Ｂ
and the second
digits will flash.
□
２
Press ○
Ａ
in accordance
with a time signal to reset
the second digits to "00".
＊
When the second digits count
any number from "30" to "59"
and ○
Ａ
is pressed, one minute
is added and the second digits
are reset to "00".
65
RECALL
BLOCK
LAP
STOP
BATT.
LAP
①Show the time/calendar mode.
③Press recall button again to return to the time/calendar mode.
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
②Press recall button to show the contrast adjustment display.
The contrast can be adjusted for 10 levels from level "1" to "10".
The display is the lightest at level "1" and the darkest at level "10".
Contrast adjustment display
Button ○
A
: Increasing the level (darker)
Button ○
B
: Decreasing the level (lighter)
ID
３.Adjustment of the contrast on the display
・The contrast of the display can be adjusted.
67
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Minutes setting
Month setting
Date setting
ID setting
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Hour setting
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Year setting
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
Finish of time/calendar
setting
ID
ID
ID
ID
ID
ID
ID
□
１
Press ○
Ｂ
and the minute
digits will flash.
□
２
With each press of ○
Ａ
, one
minute is advanced.
□
１
After all the adjustment are
completed, press ○
Ｂ
.
□
１
Press ○
Ｂ
and the hour
digits will flash.
□
２
With each press of ○
Ａ
, one
hour is advanced.
□
１
Press○
Ｂ
and the year digits
will flash.
□
２
With each press of ○
Ａ
, one
year is advanced.
□
１
Press ○
Ｂ
and the month
digits will flash.
□
２ With each press of
○
Ａ
, one
month is advanced.
□
１
Press ○
Ｂ
and the date digits
will flash.
□
２
With each press of ○
Ａ
, one
day is advanced.
□
１
When button
○
B
is pressed, the
identification number digits start flashing.
□
２With each press of button ○
A
, one digit is
advanced. "OFF" means that no
identification number is set.
66
10.PRECAUTIONS
68
（１）When the power switch of the printer is turned on during the measurement, the data measured thereafter will be printed
out.
（２）While the printer is printing out, do not pull out the roll paper or do not pull it back. Also, do not operate the stopwatch
without installing the roll paper on the printer, as this will cause a malfunction of the printer.
（３）When the printer is not used, be sure to turn the power switch of the printer "OFF".
（４）The optional parts (such as grip switch) is not used, besure to put the cap on the jack.
Remarks on roll paper (thermal paper)
Since this model is a thermal printer, which prints on thermal paper by heating it, it is not necessary to replace the ink. Be
sure to observe the following.
●To preserve new thermal paper, put it in a box to avoid direct light and keep it in a dry cool place.
●Do not touch the printing surface of the thermal paper, as the sweat or oil on the palm will cause poor printing.
●Besides the thermal paper S950 included with the printer, the thermal paper S951 is available for printing out the stored
data. It is a long-type thermal paper that can print out up to 2,800 lines. To use S951, the paper holder SVAZ007 for
exclusive use with it is necessary.
＊Be sure to use the roll paper S-950 or S-951 for exclusive use with this model. Otherwise, detective printing or damage of the printer will be caused.
