Setting the Day Advance Time
SET
3
Change "Hour" of the line shift time
(for example, from 5:00 to 7:00).
Push the CHANGE button to set
"Hour" at "7", and then push the
SET button.
At that moment, the flashing of the
display will change from "Hour" to
"Minute".
4
In the example, the "Minute" is not
to be changed. Push the SET button
again to accept, and the display
changes flashing to steady.
DAY ADV.
TIME
DAY ADV.
TIME
DAY ADV.
TIME
The day advance time refers to the time when printing shifts to the next line on a time card
for the next day. This function enables the punch out time record to print on the same line of
the previous working day even if leaving time is after midnight.
The clock default is 5:00.
If error "E-49" appears when you try to change settings, then you must reset all cards
before proceeding. (See "All Cards Reset".)
SET
SET
Example:
Change the line shift time from 5:00 a.m. to 7:00 a.m.
"Hour"
of the line
shift time
2
Push the FUNCTION button and
position the " " under the "DAY
ADV. TIME" mark.
The flashing number can
be changed.
1
Push the FUNCTION button for 3
seconds.
FUNCTION CHANGE
FUNCTION CHANGE
SET
FUNCTION CHANGE
"Minute"
of the line
shift time
19
5
Push the SET button once again.
23
15
