Seiki SK1100T, User Manual

Page: 19 / 24

Seiki Cutting Plotter
16
Q4. Why does the pattern deviate?
Reasons:
1.
Media doesn’t be placed correctly.
2. The working area is too dirty; two sides of moving
paper meet different resistances may lead to deflection
of paper.
3. Deformed or different types of pressing wheels may
lead to paper deflection.
4. Pressure to the pressing wheels is too small and paper
will be deflected easily outside force.
Q5. Why causing the phenomenon of lost step?
Reasons:
1.
Speed is too high, the pressure of a blade is too high,
and the tip of blade is too long, move paper for a long
distance, empty distance speed is too high.
2. Power voltage is too low.
Q6. Why cutting signs are not in the same depth, for
example, paper is punctured in some place but not in
other place.
Reasons:
1.
The tip blade is too long. Right method is to extend the
tip of blade no more than two thirds of the thickness of
paper which can make sure that pressure may not break
paper and then reducing the pressure of knife to ensure
that all the paper are cut thoroughly
2. There is a ditch that is cut on protective strip or new
protective strip not smooth or a side of protective strip
is put on stage which forms a bevel.