Seiki SK1100T, User Manual

Page: 20 / 24

Seiki Cutting Plotter
17
Q7. Why do you fail to tear off vinyl paper after cutting?
Reason:
1.
You didn’t set a blade proper size. Before cutting, please
test the pressure of the blade and adjust it.
2. If there shows any dotted line, you need to change new
blades
Q8. How to change the situation of origin?
When machine in Leave status, you may move tool carriage
and paper forth ward, backward, leftward or rightward; if you
press the origin button, the current tool carriage position will
be set as origin start position and the machine will be
connected (green light). Then press Leave button in Leave
status, you may free move paper. Later press Leave button to
connect status, the tool carriage will return to the position
before moving and set it as origin position.
Q9. What should you do when you cut a small sign?
1. If characters are below 20mm, adjust the speed to the
slowest. Since the distance between each character is
close, fast speed will result in substandard characters.
2. When cutting small characters, it’s better to use
compensating function and the compensating figure
should be set between 0.2-0.4mm which will bring about
better result.
3. The length of the knife tip should be shorter than the
normal length which makes small characters smoother.
Q10. What should you do when you cut a large sign?
1. If the width of cutting character is larger than that of the
cutting plotter, system software will separate is
automatically. You can also separate it by hand to make
each page joined together and form a large one. But
please make sure the width of output should be identical
with that of the memo sticker.