Seiki SK1100T, User Manual

Page: 13 / 24

Seiki Cutting Plotter
10
3. Loading Media
①
Adjust the place of pinch-rollers according to the paper-
width. Cutting plotter has 2-4 pinch-rollers and they can
be moved on the guide rail. When moving, ensure the
handle of the pinch-roller is been lifted up, then hold the
back of the pinch-roller holder and move it to the left or
right. Do not move pinch-roller from the front.
②
The place of the pinch-roller should avoid the joint of the
main metal rollers. Pinch-roller is around 1 inch away
from the edges of the media.
③
If the media is not well placed, a serious deviation will
occur. Place the media is on a vertical line, then press all
pinch-rollers down and run the media back and forth for a
few times in the job distance. Adjust the media if need it,
ensure least deviation before cutting.
4. Firstly testing
①
Place the machine on a stabile platform, and keep enough
room around it. The machine is kept away a place of
strong electromagnetic disturbance or thick dirt-powder.
②
Connect the machine to computer with the serial cable
then turn the power on. The carriage will automatically
move to the right and metal roller can rotate back and
forth once, this means machine reset.
③
If it fails to reset, press the “Reset” key.
④
The holder bracket rises around 1/8 inches. When you
press “origin” key, the bracket will fall down; release the
key, the bracket will rise again. It means the carriage and
cutter bracket can work properly.
⑤
If you want the machine to cut from appointed location,
press the “Leave” key, the Off-line indicator light will be
on, press “←” or “→”, the carriage moves to left or right;
press “↓” or “↑” , the media moves forward or backward.
Press “Origin” key, the machine will set current position
as origin start position.
⑥
Press “Test” key, the machine can start its own testing