Seiki SK1100T, User Manual

Page: 16 / 24

Seiki Cutting Plotter
13
③
Setup status:
In online status, when press the “Setup” key, the setup
indicate light is on. You may set the baud rate of serial
port. If you press “setup” key once more, it will restore to
online status. Unless professional technicians, you’re not
suggested to change the default setting.
④
Test/Stop functions:
Pressing “Test” key, the self-check program will be
started. The cutter should output a square and a circle.
During the cutting, if press “Test” key, machine can stop
until press “Test” key again, it will continue finish the job.
⑤
Origin functions:
Press “Origin” key, can change from offline status to
online status. The machine will set current position as
origin start position.