PROGRAMMING DTMF SEQUENCES
- HOLD THE “
#”
BUTTON DOWN FOR 5 SECONDS - GOES INTO PROGRAM MODE
- SELECT
PROG DTMF
- ENTER THE SLOT NUMBER TO BE PROGRAMMED (1 TO 250)
- ENTER NUMBER OF DIGITS 3-8
- ENTER
1
FOR STANDARD OR
2
FOR KNOX F1
- ENTER 1ST DIGIT AND PRESS “
#”
- ENTER REMAINING DIGITS PRESSING “
#”
AFTER EACH ONE
- ALL DIGITS WILL BE DISPLAYED. PRESS “
#”
TO ACCEPT THEM OR “
*”
TO START AGAIN
- ENTER THE NEXT SLOT NUMBER TO BE PROGRAMMED OR HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT
OR PROCEED TO NEXT OPTION
DTMF DIGITS
0 = 0 1 = 1 2 = 2 3 = 3 4 = 4 5 = 5
6 = 6 7 = 7 8 = 8 9 = 9 10 = * 11 = #
12 = A 13 = B 14 = C 15 = D
PROGRAMMING STACKS
A STACK IS A GROUP OF PAGING SLOTS THAT ARE ENTERED INTO A SINGLE PAGING SLOT SO THAT
THEY ALL PAGE SEQUENTIALLY WHEN THAT SLOT IS SELECTED. STACKS MUST BE IN SLOTS 211—250
BE SURE ALL THE SLOTS THAT YOU WANT IN THE STACK ARE ALREADY PROGRAMMED
- HOLD THE “
#”
BUTTON DOWN FOR 5 SECONDS
- GOES INTO PROGRAM MODE
- SELECT
PROG STACKS
- ENTER THE SLOT NO. FOR THE STACK
211 - 250
- ENTER THE FIRST SLOT NO. IN THE STACK
- SLOTS WITH DTMF WILL NOT WORK IN STACKS
- IT WILL ASK IF YOU WANT TO PUT IN ANOTHER SLOT NO. ENTER YES OR NO
ENTER UP TO 20 SLOTS IN THE STACK
- ANOTHER SLOT CAN BE ENTERED TO CREATE ANOTHER STACK
- HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT OR PROCEED TO NEXT OPTION
9
