DELAY ADD/DEL
IF THE RADIO USES A PTT ID WHEN IT IS KEYED THEN A DELAY MUST BE ADDED SO THE TONES WILL
TRANSMIT AFTER THE ID IS DONE.
HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT OR PROCEED TO NEXT OPTION
DE-EMPH ADD/DEL
FOR DE-EMPHASIS OF AUDIO OUTPUT. THIS IS NEEDED IF THE ENCODER AUDIO IS CONNECTED TO A
MIC INPUT THAT HAS PRE- EMPHASIS. (IT IS BEST TO CONNECT TO A FLAT AUDIO INPUT).
HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT OR PROCEED TO NEXT OPTION
SOFTWARE VER
READ THE SOFTWARE VERSION.
HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT OR PROCEED TO NEXT OPTION
.
CUSTOM TONES
TONES THAT ARE NOT MOTOROLA OR PLECTRON CAN BE ADDED TO THE MEMORY. BE AWARE THAT
CUSTOM TONES THAT ARE VERY CLOSE TO TONES BEING USED COULD CAUSE FALSE ACTIVATIONS.
STEP 1
ENTER THE TONE. ENTER ALL THE DIGITS INCLUDING THE DIGIT AFTER THE DECIMAL POINT.
EXAMPLES:
288.5 ENTER 2885
1130.0 ENTER 11300
STEP 2
ENTER THE CODE FOR THE DECODE HIGH LIMIT.
DIVIDE
506000
BY
THE TONE FREQUENCY
AND ENTER THE RESULT.
MUST
ENTER 4 DIGITS
.
EXAMPLES:
506000 / 288.5 = 1753.899 ROUND TO 1754 AND ENTER
506000 / 1130.0 = 447.78 ROUND TO 0448 AND ENTER
STEP 3
ENTER THE CODE FOR THE DECODE LOW LIMIT.
DIVIDE
494000
BY
THE TONE
AND ENTER THE RESULT.
MUST
ENTER 4 DIGITS
.
EXAMPLES:
494000 / 288.5 = 1712.30 ROUND TO 1712 AND ENTER
494000 / 1130.0 = 437.17 ROUND TO 0437 AND ENTER
11
