3
General Specifications
Power 12 – 15 VDC
Requirements
Power < 1 Watt
Consumption
Current 45 ma normally
Draw 100 ma during paging
Operating -20C to +70C
Temperature
Size W 3.25” D 6” H 1.6”
Weight .5 lbs
FEATURES
-250 CALL CAPACITY ENCODER -EASY TO PROGRAM
-TWO TONE PAGING 1 sec. 1st. Tone, 3 sec. 2nd Tone
-ACCEPTS MOTOROLA AND PLECTRON TONES -ACCEPTS CUSTOM TONES
-GROUP CALLS -PROGRAMMABLE RE-PAGE ON DECODE
-PROGRAMMABLE ALERT TONE
-PROGRAMMABLE FLAT OR DE-EMPHASIZED AUDIO
-PROGRAMMABLE DELAY (to accommodate Unit PTT ID)
-DTMF STANDARD TONES -DTMF KNOX F1 TONES
-40 STACKS OF 20 PAGES EACH -DECODES MOTOROLA OR PLECTRON TONES
-RELAY CLOSURE ON DECODE -FLASHING LED ON DECODE
-MANUAL ACTIVATION AND DEACTIVATION OF RELAY
-ALL CONNECTIONS THROUGH RJ45 JACK
-ADJUST LEVELS WITHOUT REMOVING COVER
-POWERED BY 12 -15VDC -MOUNTS ON PEDESTAL FOR MOBILE USE
WITH OPTIONAL INTERFACE UNIT
-ALERT TONES SENT TO PA SYSTEM -3 ALERT TONES WITH ASCENDING VOLUME
-RADIO ROUTED TO PA SYSTEM DURING CALL -OUTPUT FOR RED EASY WAKEUP LIGHT
-OUTPUT FOR BUNKROOM LIGHTS COMES ON AFTER 30 SECONDS AND GOES OFF IN 10 MINUTES
-PROGRAMMABLE DPDT RELAY
ON UNTIL RESET, MOMENTARY ON, ON AFTER 10 SECS OR MOMENTARY AFTER 10 SECS
4
