PROGRAMMING ENCODER
- HOLD THE “
#”
BUTTON DOWN FOR 5 SECONDS
- GOES INTO PROGRAM MODE
- SELECT
PROG ENCODER
“*”
- ENTER THE SLOT NUMBER TO BE PROGRAMMED
(1 TO 250)
- SEE THE LIST OF MOTOROLA AND PLECTRON TONES IN MEMORY ON PAGE 8
(CUSTOM TONES CAN ALSO BE ADDED )
- ENTER TONE
A
(ENTER ALL THE DIGITS INCLUDING THE
DIGIT AFTER THE DECIMAL POINT ex. 1153.4 = 11534)
- ENTER TONE
B
(ENTER ALL THE DIGITS INCLUDING THE
DIGIT AFTER THE DECIMAL POINT ex. 701.0 = 7010)
- FOR
GROUP CALL
, MAKE TONE
A
AND
B
THE SAME
- FOR
ALERT TONE ONLY
MAKE BOTH
A
AND
B
100.0 (ENTER 1000)
- THE SLOT NO AND THE TONES WILL DISPLAY
VERIFY THE CORRECT TONES AND PRESS “#”
- OPTIONAL ALERT TONE YES OR NO
- ENTER NEXT SLOT NO. IF ENTERING MORE TONES
- HOLD THE “
#”
IN FOR 5 SECONDS TO EXIT OR PROCEED TO NEXT OPTION
7