SEI Advisor A106, Operating Manual, Page: 5 / 14

PROGRAMMING
- HOLD THE “ #” BUTTON DOWN FOR 5 SECONDS
- GOES INTO PROGRAM MODE
- PRESSING THE “
#” BUTTON WILL STEP THROUGH THE PROGRAMMING OPTIONS
PRESS THE * TO SELECT THE OPTION
-
PROG ENCODER SEE PAGE 7
ENTERS TWO TONE ENCODER PROGRAM MODE
-
PROG DTMF SEE PAGE 9
ENTERS DTMF SEQUENCE PROGRAM MODE
-
PROG DECODER SEE PAGE 10
ENTERS THE TWO TONE DECODER PROGRAM MODE
-
PROG STACKS SEE PAGE 9
ENTERS THE STACK PROGRAM MODE
-
DELAY ADD/DEL SEE PAGE 11
TO ADD A 3 SECOND DELAY AFTER THE PTT. THIS IS NEEDED IF THE RADIO
TRANSMITS A UNIT ID AFTER THE PTT.
-
DE-EMPH ADD/DEL
SEE PAGE 11
FOR DE-EMPHASIS OF AUDIO OUTPUT. THIS IS NEEDED IF THE ENCODER AUDIO IS
CONNECTED TO A MIC INPUT THAT HAS PRE-EMPHASIS. (IT IS BEST TO CONNECT TO A FLAT
AUDIO INPUT)
-
SOFTWARE VER SEE PAGE 11
READ THE SOFTWARE VERSION
-
CUSTOM TONES SEE PAGE 11
TONES THAT ARE NOT MOTOROLA OR PLECTRON CAN BE ADDED TO THE MEMORY
-
CLR MEMORY? SEE PAGE 12
3 OPTIONS – CLEAR ENCODER, CLEAR DECODER, CLEAR CUSTOM TONES
-
INTERFACE ADD/DEL SEE PAGE 12
SETUP FOR THE OPTIONAL INTERFACE UNIT
6