SEI Industries 1518-3542 Service Manual Download Page 31

Page: 31 / 118

Section 6: Troubleshooting and Maintenance

Troubleshooting

2016 Bambi MAX Service Manual

–

Models 1518-3542

(Version E)

We Engineer Solutions

Checking Aircraft / Longline Wiring

•

Set the multimeter to measure DC voltage.

•

Install the black lead into the narrow socket of the helicopter wiring harness.

•

Install the red lead into the round socket of the
helicopter wiring harness.

• The multimeter should read approx. +28V.

•

Actuate the bucket dump switch.

• The multimeter should still read +28V.

•

Move the red lead to the wide socket of the
helicopter wiring harness.

• The multimeter should read 0V.

•

Actuate the bucket dump switch.

• The multimeter should now read +28V.

If a longline is being used, re-connect the longline into the aircraft wiring harness and repeat the above
procedure for the receptacle on the bottom of the longline.

Summary of Contents for 1518-3542























































































































Search results

Summary of Contents for 1518-3542

Reviews:

Related manuals for 1518-3542

Brands by name

Popular brands

SEI Industries 1518-3542, Service Manual

Search results

Summary of Contents for 1518-3542

Reviews:

Related manuals for 1518-3542

Brands by name

Popular brands